Skip to main content
McAfee MVISION Cloud

Cloud Connector Config Panorama Integration

Use these options to configure your Palo Alto Networks Panorama CLR integration.

IMPORTANT: You must have the MVISION Cloud Connector user role to configure Cloud Connector. For details, see About User Roles and Access Levels

KNOWN ISSUE. The MVISION Cloud Connector Panorama integration is not supported for Panorama 7.1 or later, as the endpoints include the version number, and the request payload structure has also changed. If you have Panorama 7.1 or later, and you want to pull the Service Group information from the MVISION Cloud dashboard, use the Publish URL method instead of configuring Cloud Connector.

clipboard_e1fdc3fd03ba6046cb10f209d4b2e53da.png

Field Description
Panorama Hostname Enter the hostname or IP address of your Panorama CLR integration.
Panorama Username Enter the username to connect to your Panorama integration.
Panorama Password Enter the password to connect to your Panorama CLR integration.
Panorama Commit Level Select the commit level: 
  1. Panorama and Device Group Commit. Anytime new URLs are pushed to the PAN device, they are committed to Panorama.
  2. Panorama Only. Commit changes only to Panorama.
  3. Disabled. Do not commit any changes.

 

Advanced Settings 

Click Show Advanced Settings to display. 

Field Description
Enable Panorama CLR Snapshot Select Yes to enable Panorama CLR Snapshot. Select No to disable.
Panorama CLR Snapshot Interval in Hours If Snapshot mode is enabled, enter the Snapshot mode frequency in hours.
Panorama CLR Polling Delay Enter the frequency that the Panorama CLR runs in milliseconds.
Panorama CLR Device ID The Panorama CLR Device ID default property is 5. Do not change this property.

 

  • Was this article helpful?