The WBG-4500-E appliance model has six network interfaces and an RMM interface on its back panel.
The network interfaces include four onboard interfaces and two on a network interface card that is preinstalled in a card slot on the upper right.
The network interfaces provide ports, which the operating system assigns names to as shown in the following table.
NOTE: Traffic can be routed with different speed rates through the ports on these interfaces. See the port column of the table.
|Position||Interface||Name assigned to port on interface|
For operating the Remote Management Module (RMM) with Baseboard Management Controller (BMC)
|2||Network interface 1||eth2 (10,100, or 1000 Mbit/s)|
|3||Network interface 2||eth0 (10,100, or 1000 Mbit/s)|
|4||Network interface 3||eth3 (10,100, or 1000 Mbit/s)|
|5||Network interface 4||eth1 (10,100, or 1000 Mbit/s)|
|6||Network interface 5||eth5 (10,100, or 1000 Mbit/s)|
|7||Network interface 6||eth4 (10,100, or 1000 Mbit/s)|