Skip to main content

Check out Interactive Visual Stories to gain hands-on experience with the SSE product features. Click here.

Skyhigh Security

LEDs on an Additional Network Interface Card

You can install additional network interface cards on the WBG-5000-F and WBG-5500-F appliance models to increase the number of network interfaces and ports that are available.

When a network interface card with four ports is installed, two LEDs at its bottom show the connection speed rate and activity status for each port. They are visible on the back panel of an appliance in the position where the card is installed.

The LED that indicates the connection speed rate is also known as Link LED.

clipboard_e3a90fd5907b1064725e5416439aff5d6.png
LEDs for a port on a network interface card

The following table explains the meanings of the LED color codes. 

LED Color Meaning
Link LED Amber

Green
Connection speed rate: 1 GB/s

Connection speed rate: 10 GB/s
Activity LED Blinking green Port is active.

 

  • Was this article helpful?