Skip to main content
McAfee Enterprise MVISION Cloud

Turn on the Blade System Enclosure

Supply power to the blade system enclosure and turn it on.

  1. Connect the power cords of the enclosure to the power supplies and the power outlets.

    NOTE: Use two power circuits to ensure all blade servers in the enclosure turn on. If you use only one circuit and the power management settings are configured for AC redundant (which is also recommended), some blade servers will fail to turn on.
     
  2. Turn on the blade system enclosure.

You can now install the Web Gateway appliance software on a blade server in the enclosure.

  • Was this article helpful?