Skip to main content
McAfee Enterprise MVISION Cloud

Create a Rule for the Enable Next Hop Proxy Event

You can create a rule that triggers the Enable Next Hop Proxy event when a server from the list of protected web servers is requested.

  1. Select Policy | Rule Sets.
  2. On the rule sets tree, select the Next Hop Proxy rule set.
    The rules of this rule set appear on the settings pane.
  3. Click Add Rule.
    The Add Rule window opens with the Name step selected.
  4. In the Name field, type a name for the rule, for example, Address protected web servers as next-hop proxies.
  5. Select Rule Criteria, then If the following criteria is matched, and click Add.
    The Add Criteria window opens.
  6. Configure the rule criteria as follows:
    1. From the list of properties in the left column, select URL.Host.
    2. From the list of operators in the middle column, select does not match in list.
    3. From the list of operands in the right column, select the web server list you configured to restrict access to these servers, for example, Protected web servers.
  7. Click OK.
    The window closes and the new criteria appears under Rule Criteria.
  8. Click Action, and leave the default Continue.
  9. Click Events, then Add and from the drop-down list that appears, select Event.
    The Add Event window opens.
  10. Configure an event as follows:
    1. From the Event list, select Enable Next Hop Proxy.
    2. From the Settings list, select the settings you configured for this rule, for example, Protected web servers.
  11. Click OK.
    The window closes and the new event appears under Events.
  12. Click Finish.
    The Add Rule window closes and the new rule appears within the Next Hop Proxy rule set.
  13. Click Save Changes
  • Was this article helpful?