Skip to main content

Check out Interactive Visual Stories to gain hands-on experience with the SSE product features. Click here.

Skyhigh Security

Configure Network Settings for a Director Node in Transparent Router Mode

To configure a director node in Transparent Router mode, configure network interfaces for inbound and outbound web traffic.

This is part of the procedure for configuring the Transparent Router mode. We recommend that you begin with this part. For on overview of the complete procedure, see Configure the Transparent Router Mode.

  1. Select Configuration | Appliances.

  2. On the appliance tree, select the appliance you want to configure as a director node and click Network Interfaces.

  3. Configure network interfaces as needed for your network.

    You need at least one interface for inbound and one for outbound web traffic.

  4. Click Save Changes.

    You are logged off and logged on to the appliance again.

You have now configured network settings for a director node in Transparent Router mode. 

Continue with configuring proxy settings for this node. For information about how to configure these settings, see Configure Proxy Settings for a Director Node in Transparent Router Mode.

  • Was this article helpful?