Skip to main content
McAfee Enterprise MVISION Cloud

Create a Rule Set to Filter IFP Requests

You can create a rule set with rules that filter requests for web access submitted under the IFP protocol.

  1. Select Policy | Rule Sets, then click Add and select Rule Set.
    The Add New Rule Set window opens.
  2. In the Name field, enter a suitable name for the rule set, for example Filter IFP Requests.
  3. Under Applies to, deselect Responses and Embedded Objects.
  4. Under Apply this rule set, select If the following criteria is matched.
  5. Configure the rule set criteria.
    1. Under Criteria, click Add and select Advanced criteria.
      The Add Criteria window opens
    2. From the properties list, select Connection.Protocol.
    3. From the operators list, select equals.
    4. In the input field for operands, type IFP.
    5. Click OK.
    6. The Add Criteria window closes and the criteria appears in the Criteria field.
  6. Click OK.
    The Add New Rule Set window closes and the new rule set appears on the rule set tree.

When the rule set has been created, you need to insert rules for URL filtering into it. You can, for example, copy rules from the default URL Filtering rule set and adapt them as needed.

  • Was this article helpful?